How to Fix a Dryer


The best thing to do to fix your dryer is to know what the problem is. The problem could be something like a fuse, a timer, a heating element, a lint filter, or even a door switch. The best thing to do to fix your dryer would be to start by testing each of these elements and working out which one is malfunctioning. This way, you will be able to get to the root of the issue and save money on repair costs.

Door switch

A dryer door switch is a small, inexpensive device that tells your dryer when to operate. It is a small plastic box, about an inch long, with metal terminals that connect it to your dryer. Your dryer will run with the door open when it is functioning correctly. If it’s not, you’ll want to replace it as soon as possible.

Depending on the make and model of your machine, a replacement switch will vary. You may need to remove the top of your dryer to access the button.

This is one of the most common problems with dryers. Fortunately, replacing it is easy and should not take more than a few minutes.

First, you should check the door switch. You should hear a clicking sound when you press it if it’s functioning. It should also be easily removable.

Heating element

The heating element in your dryer can be an excellent place to start when it comes to the old faithful. But the best way to ensure you and your family are dry and warm is to take a good hard look at the machine that churns out your clothes. The lint lurching around can be detrimental to the machine’s performance, and if you have a dry laundry day on the horizon, you’re going to want to take some time to ensure you haven’t done any unsavory things to the appliance. A professional look at the lint is a practical way to ensure you are not in for a painful surprise.

The obvious solution is to buy a new dryer. While you’re at it, take some time to make sure the vents are not clogged. The lint floating around is a fire hazard and can cause your dryer to catch fire before it can dry your clothes.

Lint filter

If your dryer is not drying your clothes as quickly as it should, you may need to repair your lining filter. A dirty lint filter can reduce the airflow through the outside vent and slow the drying cycle. The buildup of lint can also lead to a fire.

You can easily replace your lint filter. You will need to open the dryer front panel and remove any screws that are attached to the frame.

A lint filter is a mesh body that collects lint from the air flowing through the dryer. It is essential to clean it regularly to avoid a buildup of lint. You can do this with hot water and soap.

There are two types of lint filters on most clothes dryers. Someplace on top of the drum, and at the bottom of the dryer.


A dryer timer is used to control the flow of electricity to the heating element. A defective timer may be the culprit when a dryer does not heat or runs too long. If a timer is not functioning, a service technician can diagnose and repair it. First, however, you can do some essential repair work yourself.

The first step in dryer timer repair is ensuring the motor is in good working condition. This can be done by checking the continuity of the circuits. Next, a multimeter can be used to measure the resistance and current.

Another way to check for dryer timer issues is to remove the back panel. The panel will include buttons and knobs that help to control the dryer. Once the board is removed, the wires should be disconnected and labeled.

Thermal fuse

If you notice that your clothes dryer is not heating up, it could be a problem with your thermal fuse. This device is a safety mechanism that stops the flow of electricity to the motor circuit when the exhaust temperature exceeds a certain threshold.

The fuse is located inside your dryer. It can be easily accessible if the panel is removed. It is generally inexpensive to replace.

The thermal fuse is a small, one-inch plastic piece with two wires attached. The fuse has an internal sensor that stops the power flow when it detects a temperature over the limit.

A blown thermal fuse can be dangerous and cause your dryer to stop working. It also causes your dryer to smell. The best way to avoid a blown thermal fuse is to clean your exhaust vent regularly. A duct cleaning brush can be used to get rid of any accumulated debris.